You Searched For: LABCONCO

Supplier: LABCONCO

Description: These portable systems provide user protection by keeping powders and particulates contained during weighing procedures. The built-in blower and HEPA filter are mounted in the upper plenum to save space, and the enclosures have low installation costs and require no outside ducting. Systems also provide quiet operation as low as 45 dBA, depending on face velocity.

Supplier: LABCONCO

Description: FreeZone® bench top freeze dryers are designed for lyophilising light to moderate sample loads. The compact design is ideal for laboratories with limited floor space.

Catalog Number: (LBCP110410021)

Supplier: LABCONCO

Description: The Protector® XStream® benchtop laboratory hoods are chemical resistant, fiberglass reinforced, composite liner and baffle. These are designed for general chemical applications.

UOM: 1 * 1 items

Sale

Supplier: LABCONCO

Description: Replacement oil and filters

Supplier: LABCONCO

Description: All RapidVap® Vertex™ Dry Block evaporators require a Block (not included). Blocks of solid aluminum include stainless steel handles to lift the block in and out of the evaporator. A 0,21" (0,5 cm) diameter port in the upper left hand corner of the block is provided for insertion of the temperature probe to monitor upper block temperature.

Supplier: LABCONCO

Description: Glassware washing machines, Lower standard open racks and spindle racks constructed of type 304 stainless steel, 540×530×90 mm, 4,5 kg.

Catalog Number: (LBCP3980422)

Supplier: LABCONCO

Description: Purifier HEPA filtered enclosures protect the user from agents that require biosafety level 1, 2 or 3 containment but no product protection. With ergonomic air foil with aerodynamic clean-sweep airflow openings; upper dilution air supply; zone-perforated rear baffle; side-entry air foils; and upper containment sash foil.

UOM: 1 * 1 items

Sale

Supplier: LABCONCO

Description: These cabinets support fume hoods and safely store and vent solvents and other flammable liquids. The contents inside them are also protected during any fire case.

Supplier: LABCONCO

Description: Guardian digital airflow monitor, 2,7 kg, For: Laboratory Hoods, Protector®

Supplier: LABCONCO

Description: These glove boxes with stainless steel liner provide inlet and outlet ULPA filtration and a leak-tight physical barrier to protect the operator from exposure to potentially hazardous materials and perform work with contamination-sensitive materials under vacuum or in an inert environment. Available with two or four glove ports (double version).

Catalog Number: (LBCP3820020)

Supplier: LABCONCO

Description: These PuriCare Open Access Transfer Station offer utmost efficiency for cage changing operations. Open access on two sides provides ample workspace for one or two operators to transfer animals from dirty cages to clean ones. This enclosure provides personnel, animal and environmental protection. HEPA-filtered vertical airflow provides Class 100 clean air in the work area to protect the animals from cross-contamination. At the same time, room air is drawn into grilles located on the work surface directly below the sash openings to ensure containment and protect the operator from allergens. All contaminated air inside the enclosure is filtered so that particulate-free air is exhausted back into the room, protecting the environment.

UOM: 1 * 1 items

Sale

Supplier: LABCONCO

Description: Storage cabinets support fume hoods and used for storage and venting of small laboratory instruments, mild acids and other reagents.

Supplier: LABCONCO

Description: Accessory for Freeze Dryer, Support grid, stainless steel, holds 144 ampules (12 mm Ø), 178×178 mm, 1,1 kg

Supplier: LABCONCO

Description: Waste port incl. rubber stopper plug, provides a Ø 4,5" (11,4 cm) pass-through port to attach an external waste bag; requires Ø 6,16" drill hole, waste bags and bands (not included)

Supplier: LABCONCO

Description: XPert™ filtered balance stations are vented balance enclosures designed to protect the user during powder weighing operations. The built-in HEPA filter, mounted in the upper plenum, removes particulates, so that clean air is exhausted to the atmosphere. XPert® filtered balance station is 'stationary' because ducting to an outside blower or house exhaust system is required. Powder weighing applications found in pharmaceutical research and other industries are ideal for these enclosures. Interior dimensions accommodate large micro and analytical balances and containment-enhancing features ensure personnel safety.

Catalog Number: (LBCP8022000)

Supplier: LABCONCO

Description: Handy cart stores lab supplies and may be moved easily to within reach of the user working at a bench, fume hood or biological safety cabinet. Three right side compartments accommodate pipettes and other supplies. Top left side compartment with front panel cutouts accommodates boxes of wipes and gloves. The hinged panel may be pivoted down for loading. Drawer holds a variety of miscellaneous small instruments and supplies. Open storage area in bottom holds larger equipment and supplies. Work surface and bottom are constructed of corrosion-resistant white high density polyethylene that is easy to clean. Remaining components are constructed of corrosion-resistant white ABS.

UOM: 1 * 1 items

Sale