You Searched For: LABCONCO


263  results were found

SearchResultCount:"263"

Sort Results

List View Easy View

Rate These Search Results

Supplier: LABCONCO
Description: Replacement ULPA filter, 99,99 % on particles 0,12 micron in size, 1070×460×80 mm

Supplier: LABCONCO
Description: Evaporator, centrifugal, CentriVap®, Rotary vane vacuum pump, 117 liters/minute displacement at 60 Hz, ultimate vacuum: 2 × 10<sup>-3</sup> mBar, 230 V

Supplier: LABCONCO
Description: Evaporator, centrifugal, Rotor for 24×1,5 ml microcentrifuge tubes, PTFE coated aluminium

Supplier: LABCONCO
Description: Circulation tubing kit, flexible hose, neoprene lined

Catalog Number: (LBCP141610021)
Supplier: LABCONCO
Description: The PVC acid digester Protector® laboratory hoods are strong acid resistant. Their liners are made up of unplasticised polyvinyl chloride.
UOM: 1 * 1 items


Catalog Number: (135-1097)
Supplier: LABCONCO
Description: XPert weigh boxes have inlet and outlet HEPA filters and provide a leak-tight physical barrier to protect the operator from hazardous airborne particulates and powders.
UOM: 1 * 1 items


Supplier: LABCONCO
Description: Pure and ultra pure water system, General chemistry/UF polishing kit

Catalog Number: (LBCP4863010)
Supplier: LABCONCO
Description: Ductless ventilation systems with glass tops and sides and low profiles are well suited for educational settings. Clean-Sweep air foil and zone-perforated rear baffle maximise containment.
UOM: 1 * 1 items


Supplier: LABCONCO
Description: CentriVap® vacuum concentrators are available as complete systems or system packages. The acid resistant model is recommended for corrosive solvents (TFA, acetic acid, and so on). Other models feature Heat Boost, which surrounds the chamber wall, to further speed evaporation of high boiling point solvents.

Catalog Number: (LBCP4026410)
Supplier: LABCONCO
Description: Purifier®, Aluminum tube rack, conical, 4 well 50 ml 28 mm, Temp-zone package
UOM: 1 * 1 items


Supplier: LABCONCO
Description: An efficient, automatic evaporator system which can be used with a broad range of aggressive chemicals. In RapidVap N₂ systems, a stream of nitrogen or dry gas is directed downward onto the surface of the sample. Nitrogen blow-down reduces the partial pressure directly over the liquid to speed evaporation and help remove the solvent as it evaporates. Nitrogen may be programmed for 2, 4, 6 or all 8 tube locations. Vortex motion and dry heat may also be applied to further accelerate processing.

Supplier: LABCONCO
Description: These systems use vacuum along with heat and vortex motion to help speed evaporation and provide an alternative to traditional centrifugal evaporation methods. The systems may be used with a broad range of aggressive chemicals. Heat is supplied by a dry block heating system that, unlike water baths, adds no potential source of contamination and requires no maintenance.

Supplier: LABCONCO
Description: Evaporator, centrifugal, Glassware caps, PTFE, for 600 ml tubes

Supplier: LABCONCO
Description: Protector premier hoods are suitable for general chemistry applications and also explosion-proof models are available for laboratories with potentially explosive/flammable atmospheres. Hoods are available with a built-in standard fiberglass blower, or an explosion-proof fiberglass blower, or without a blower (remote blower sold separately).

Environmentally Preferable

Catalog Number: (531-0962)
Supplier: LABCONCO
Description: Vacuum diaphragm pump, Vacuum controller
UOM: 1 * 1 items


Supplier: LABCONCO
Description: Combine the separate concentrator and cold trap components into one space-saving console and include casters for portability from laboratory to laboratory. A 12 to 17 mm rotor and solvent trap are also included. The interior can accommodate a vacuum pump - the only additional component necessary to begin processing.

Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at 1-800-932-5000.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at 1-800-932-5000.
This product is marked as restricted and can only be purchased by approved Shipping Accounts. If you need further assistance, email VWR Regulatory Department at eurega_services@eu.vwr.com
-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organization. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
This product is no longer available. Alternatives may be available by searching with the VWR Catalog Number listed above. If you need further assistance, please call VWR Customer Service at 1-800-932-5000.
17 - 32 of 263
no targeter for Bottom