You Searched For: Vacuum Diaphragm Pumps

Catalog Number: (VACU20737514)

Supplier: VACUUBRAND

Description: This VARIO® chemistry pumping unit optimizes vacuum conditions automatically by precisely and continuously adjusting the diaphragm pump´s motor speed. Thanks to the motor speed control the pump operates only when vacuum is needed, saving energy and reducing maintenance.

UOM: 1 * 1 items

Sale

Catalog Number: (181-1651)

Supplier: VACUUBRAND

Description: Model PC 8/MV 10C
With its built-in four-stage chemistry diaphragm pump MV 10C (for technical specifications and full description, please see catalogue no. 181-0025), this vacuum pump unit achieves an oil-free vacuum down to 0,9 mbar. It is used for applications with high requirements in terms of final vacuum and pumping capacity in chemical laboratories, technical colleges or small production plants, e.g. extracting and transferring of aggressive gases, distillation, vacuum drying etc.

UOM: 1 * 1 items

Sale

Supplier: GARDNER DENVER

Description: All standard WOB-L piston pumps are recommended for pumping vapors of aqueous solutions including buffers but not for acidic, basic or organic vapours or gases.

Catalog Number: (181-0339)

Supplier: VACUUBRAND

Description: This VARIO® chemistry pumping unit provides vacuum control by precise and continuous adaptation of the diaphragm pump's motor speed. The on-demand motor speed control extends diaphragm lifetime considerably.

UOM: 1 * 1 items

Sale

Supplier: GARDNER DENVER

Description: The MPC chemical duty diaphragm pumps use PTFE and other fluorinated plastics for the wetted parts to allow aggressive solvent and acid vapours to be pumped. If the pump should handle harsh chemical vapours, then the superior chemical resistant X2 version with higher grade seals and thicker coatings are the best choice. These are well known for quiet operation and running smoothness.

Supplier: VACUUBRAND

Description: These chemistry vacuum systems can be used in a wide range of applications for evacuating or moving gases and vapours between containers in chemistry and physics laboratories, e.g. as an alternative to water jet pumps and rotary vane pumps. Compact construction, very quiet running, long service life, diaphragm and valves are very easy to replace. Oil-free vacuum.

Supplier: VACUUBRAND

Description: Compact, powerful pump gives ideal solution for continuous, oil-free pumping of corrosive gases and vapors with exceptional high pumping speed. Eight-cylinder NT pump features quiet operation with smooth, easy-to-clean surfaces.

Catalog Number: (188-0006)

Supplier: VACUUBRAND

Description: Chemistry diaphragm pumps from VACUUBRAND for aggressive gases and vapors are available in the basic version, with two-point or VARIO® control. Their construction with fluoropolymers makes them very resistant to chemical vapors from inlet to exhaust.

UOM: 1 * 1 items

Sale

Catalog Number: (181-0159)

Supplier: VACUUBRAND

Description: The VP 2 Autovac chemistry pumping unit, with vacuum controller, meets the demands of modern rotary evaporation. The hysteresis-free vacuum control prevents boiling retardation and foaming, therefore, ensuring consistently high process safety and an exceptionally high performance, even at low vacuum. This control enables detection of vapour pressure and fully automatic adjustment of the vacuum level to the process requirements without any user programming or intervention.

UOM: 1 * 1 items

Sale

Supplier: VACUUBRAND

Description: <B>Chemistry diaphragm pumps: </B>Chemistry diaphragm pumps in equipment category 2 (e.g. for Zone 1) with ATEX compliance. These pumps are exceptionally well designed for the avoidance of ignition sources. They have good chemical resistance, are oil-free, have no friction surfaces and the suction chamber is hermetically sealed off from the drive unit compartment. Motor with flameproof enclosure and integrated, self contained overcurrent and overheating protection for direct 230 V/60 Hz single-phase connection. Diaphragm pump heads made of anti-static materials. Chemically resistant: Materials in contact with media; fluorinated plastics, stainless steel, FFKM. Gas ballast with separate inert gas connection. Pressure relief valves inside and at the outlet. Safety membrane technology with the option for inert gas flushing and membrane tear detection.

Supplier: VACUUBRAND

Description: These mechanical diaphragm pumps function without oil. They are easy to operate, use no water and generate neither wastewater nor used oil. These pumps are used for evacuating or pumping gases between containers in chemistry or physics laboratories and are extremely versatile.

Catalog Number: (ILMV4000511-04)

Supplier: GARDNER DENVER

Description: These are certified pumps for the evacuation of combustible atmospheres inside or outside of highly combustible environments. They are used for operating in potentially explosive atmospheres.

UOM: 1 * 1 items

Sale

Supplier: GARDNER DENVER

Description: CDK turbomolecular pumping systems are completely oil-free. It incorporate an oil-free SST turbomolecular pump using dry-running, solid-lubricated ceramic bearings. The backing pump is an oil-free diaphragm vacuum pump.

Supplier: VACUUBRAND

Description: These chemistry vacuum systems can be used in a wide range of applications for evacuating or moving gases and vapours between containers in chemistry and physics laboratories, e.g. as an alternative to water jet pumps and rotary vane pumps. Compact construction, very quiet running, long service life, diaphragm and valves are very easy to replace. Oil-free vacuum.

Catalog Number: (531-0942)

Supplier: LABCONCO

Description: Single- or dual-head chemically resistant, dry running diaphragm pumps for a wide range of laboratory applications. They transfer and evacuate without affecting the media, i.e. media remains uncontaminated.

UOM: 1 * 1 items

Sale