You Searched For: Pumps

Supplier: GARDNER DENVER

Description: The MPC chemical duty diaphragm pumps use PTFE and other fluorinated plastics for the wetted parts to allow aggressive solvent and acid vapours to be pumped. If the pump should handle harsh chemical vapours, then the superior chemical resistant X2 version with higher grade seals and thicker coatings are the best choice. These are well known for quiet operation and running smoothness.

Catalog Number: (ILMVU1402N-50)

Supplier: GARDNER DENVER

Description: CHEMSTAR® pumps are built to withstand corrosive chemical vapor environments - durable performance over the long haul. CHEMSTAR® is designed to minimise the effects of harmful chemicals.

UOM: 1 * 1 items

Sale

Supplier: INTEGRA BIOSCIENCE

Description: The VACUBOY hand operator is ideal for aspirating and suctioning liquids from cuvettes, microtitration plates, test tubes, Petri dishes, cell culture bottles, roller bottles, bioreactors and other typical laboratory vessels in a safe and controlled way. It is designed to be used with many different stainless steel aspiration adapters, Pasteur and serological pipettes and pipette tips for an enormous range of applications. Each adapter has been specially designed to match the dimensions and the geometry of the corresponding glass or plastic laboratory vessels. The hand operator can be connected to any vacuum source already in the laboratory, thus serving to improve the existing facilities.

Supplier: VACUUBRAND

Description: <B>Chemistry diaphragm pumps: </B>Chemistry diaphragm pumps in equipment category 2 (e.g. for Zone 1) with ATEX compliance. These pumps are exceptionally well designed for the avoidance of ignition sources. They have good chemical resistance, are oil-free, have no friction surfaces and the suction chamber is hermetically sealed off from the drive unit compartment. Motor with flameproof enclosure and integrated, self contained overcurrent and overheating protection for direct 230 V/60 Hz single-phase connection. Diaphragm pump heads made of anti-static materials. Chemically resistant: Materials in contact with media; fluorinated plastics, stainless steel, FFKM. Gas ballast with separate inert gas connection. Pressure relief valves inside and at the outlet. Safety membrane technology with the option for inert gas flushing and membrane tear detection.

Supplier: VACUUBRAND

Description: Compact, powerful pump gives ideal solution for continuous, oil-free pumping of corrosive gases and vapors with exceptional high pumping speed. Eight-cylinder NT pump features quiet operation with smooth, easy-to-clean surfaces.

Supplier: KARTELL

Description: Vacuum pumps have built in vacuum release valve allows for quick and easy release of the vacuum without disconnecting the pump.

Supplier: VACUUBRAND

Description: These chemistry vacuum systems can be used in a wide range of applications for evacuating or moving gases and vapours between containers in chemistry and physics laboratories, e.g. as an alternative to water jet pumps and rotary vane pumps. Compact construction, very quiet running, long service life, diaphragm and valves are very easy to replace. Oil-free vacuum.

Catalog Number: (181-1030)

Supplier: VACUUBRAND

Description: <B>Model CVC 3000: </B>Fully electronic, highly versatile vacuum gauge and controller. The controller is equipped with a built-in capacitive absolute-pressure transducer made from alumina/ceramic as well as a built-in venting valve and switched outlets for a suction line valve and a coolant water valve. It eases work considerably and enables environmentally friendly operation whilst protecting samples, solvent recovery, reduced foam formation and superheating. The optimum vacuum setting can be found quickly and simply, even with unknown mixtures and pressures.

UOM: 1 * 1 items

Sale

Catalog Number: (181-0159)

Supplier: VACUUBRAND

Description: The VP 2 Autovac chemistry pumping unit, with vacuum controller, meets the demands of modern rotary evaporation. The hysteresis-free vacuum control prevents boiling retardation and foaming, therefore, ensuring consistently high process safety and an exceptionally high performance, even at low vacuum. This control enables detection of vapour pressure and fully automatic adjustment of the vacuum level to the process requirements without any user programming or intervention.

UOM: 1 * 1 items

Sale

Catalog Number: (188-0006)

Supplier: VACUUBRAND

Description: Chemistry diaphragm pumps from VACUUBRAND for aggressive gases and vapors are available in the basic version, with two-point or VARIO® control. Their construction with fluoropolymers makes them very resistant to chemical vapors from inlet to exhaust.

UOM: 1 * 1 items

Sale

Supplier: VACUUBRAND

Description: Vacuum filtration is one of the most common applications used for sample preparation in chemistry, microbiology, wastewater control and other analytical processes. VP 100 and VP 100 C diaphragm pumps offer a compact, high performance and easy to use solution which is perfect for both single and multiple filtrations.

Catalog Number: (VACU20741800)

Supplier: VACUUBRAND

Description: These VARIO® pumping units provide precise vacuum control by adjusting the diaphragm pump's motor speed. They feature fully automatic evaporation control at the push of a button. The PC 3016 NT VARIO pumping unit is a proven concept for evaporations with large amounts of solvents. The inlet separator (AK) retains particles and liquid droplets, the waste vapor condenser at the outlet (EK) is highly efficient and compact. The condenser enables near 100-percent solvent recovery, efficient recycling and active protection of the environment. Eight-cylinder NT pumps features quiet operation with smooth, easy-to-clean surfaces.

UOM: 1 * 1 items

Sale

Catalog Number: (VACU20744800)

Supplier: VACUUBRAND

Description: These VARIO® pumps and pumping units feature a very high pumping speed and attain an outstanding ultimate vacuum. They provide precise vacuum control by adjusting the diaphragm pump's motor speed. The controller provides fully automatic evaporations without any need of parameter input. The pump design offers exceptionally high chemical resistance supporting almost universal usage in chemistry and pharmaceutics The inlet separator (AK) retains particles and liquid droplets, the waste vapor condenser at the outlet (EK) is highly efficient and compact. The condenser enables near 100-percent solvent recovery, efficient recycling, and active protection of the environment.

UOM: 1 * 1 items

Sale

Catalog Number: (ILMV1405C-02)

Supplier: GARDNER DENVER

Description: The Welch 1397 vacuum pump is a rugged and robust vacuum pump for applications requiring pressures <1 Torr. The 1397 achieves <0,001 Torr with a pumping speed of 500 liters/min (17,7 CFM).

UOM: 1 * 1 items

Sale

Supplier: GARDNER DENVER

Description: Handy utility vacuum pump is ideal for basic lab operations.

Supplier: VACUUBRAND

Description: The VacuuCenter BVC basic is designed for connection to an existing external vacuum source like a diaphragm pump or a vacuum network (e.g., VACUU·LAN®) and does not require electric power. The chemically resistant mechanical vacuum controller always ensures an optimal operating vacuum. The controller opens only when needed thus limiting the gas load on the vacuum source. The evaporation of collected liquid is minimised. The inlet tubing integrated in the bottle head reduces aerosol and foam formation and ensures a long service life of the hydrophobic protection filter. The aspiration system is available either as BVC basic with 4 litre PP bottle or as BVC basic G with 2 litre coated borosilicate glass bottle.