You Searched For: VACUUBRAND


467  results were found

SearchResultCount:"467"

Sort Results

List View Easy View

Rate These Search Results

Supplier: VACUUBRAND
Description: High vacuum, helium leak-tested right angle valves VE have stainless steel bellows which seals the drive mechanism without any gap on the vacuum side.

Supplier: VACUUBRAND
Description: <B>Chemistry diaphragm pumps: </B>Chemistry diaphragm pumps in equipment category 2 (e.g. for Zone 1) with ATEX compliance. These pumps are exceptionally well designed for the avoidance of ignition sources. They have good chemical resistance, are oil-free, have no friction surfaces and the suction chamber is hermetically sealed off from the drive unit compartment. Motor with flameproof enclosure and integrated, self contained overcurrent and overheating protection for direct 230 V/60 Hz single-phase connection. Diaphragm pump heads made of anti-static materials. Chemically resistant: Materials in contact with media; fluorinated plastics, stainless steel, FFKM. Gas ballast with separate inert gas connection. Pressure relief valves inside and at the outlet. Safety membrane technology with the option for inert gas flushing and membrane tear detection.

Supplier: VACUUBRAND
Description: These small flanges with thread made of stainless steel.

Supplier: VACUUBRAND
Description: These centring and sealing rings for small stainless steel flange KF connections. With aluminium sealing ring.

Catalog Number: (188-0006)
Supplier: VACUUBRAND
Description: Chemistry diaphragm pumps from VACUUBRAND for aggressive gases and vapors are available in the basic version, with two-point or VARIO® control. Their construction with fluoropolymers makes them very resistant to chemical vapors from inlet to exhaust.
UOM: 1 * 1 items


Catalog Number: (181-0159)
Supplier: VACUUBRAND
Description: The VP 2 Autovac chemistry pumping unit, with vacuum controller, meets the demands of modern rotary evaporation. The hysteresis-free vacuum control prevents boiling retardation and foaming, therefore, ensuring consistently high process safety and an exceptionally high performance, even at low vacuum. This control enables detection of vapour pressure and fully automatic adjustment of the vacuum level to the process requirements without any user programming or intervention.
UOM: 1 * 1 items


Supplier: VACUUBRAND
Description: Oil mist filter outlet side FO R 8/9/16, For: RE 8, RZ 8, RE 9, RZ 9, RE 16, RZ 16

Supplier: VACUUBRAND
Description: Vacuum diaphragm pump, Modification Kit for small flange KF DN 16

Supplier: VACUUBRAND
Description: Vacuum aspiration system accessory, Quick coupling for BVC21 handle

Supplier: VACUUBRAND
Description: T-pieces with small flanges KF made of aluminium or stainless steel.

Supplier: VACUUBRAND
Description: The VacuuCenter BVC control serves for efficient and convenient aspiration of supernatants. The vacuum level - and thus the suction force - is precisely adjustable via the electronic touch panel and allows a sensitive and reproducible operation. The chemically resistant diaphragm vacuum pump is automatically turned on and off as needed, which reduces the low noise level even further. The BVC control is available in two complete equipment options with different collection flasks. The 2 litre borosilicate glass bottle with a protective coating has a very high chemical resistance. For larger amounts of liquids the 4 litre bottle of unbreakable polypropylene (PP) is used. The smooth surfaces allow an easy cleaning of the systems.

Environmentally Preferable

Supplier: VACUUBRAND
Description: The VS, VS C and VS B series valves are butterfly-type valves which offers very good conductance. The VS C series features a valve seal made of perfluorelastomer material (FFKM).

Supplier: VACUUBRAND
Description: These small flanges with weld stub short are made of stainless steel.

Supplier: VACUUBRAND
Description: These elbow pieces with small flanges are made of aluminium or stainless steel.

Supplier: VACUUBRAND
Description: Stainless steel, with FPM O-ring seal.

Supplier: VACUUBRAND
Description: Valves of the VK series are sturdy isolation devices for the rough and fine vacuum range. The VKE series uses stainless steel for the metal parts and fiberglass reinforced PTFE seatings.

Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at 1-800-932-5000.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at 1-800-932-5000.
This product is marked as restricted and can only be purchased by approved Shipping Accounts. If you need further assistance, email VWR Regulatory Department at eurega_services@eu.vwr.com
-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organization. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
This product is no longer available. Alternatives may be available by searching with the VWR Catalog Number listed above. If you need further assistance, please call VWR Customer Service at 1-800-932-5000.
33 - 48 of 467
no targeter for Bottom