You Searched For: LABCONCO


783  results were found

Sort Results

List View Easy View
SearchResultCount:"783"
Description: HEPA-filtered pressure relief vent kit, with 99,99% efficient HEPA filter; for ducting to the outside or room; may be used with 5241200 carbon-filtered vent kit
Catalog Number: LBCP5238500
UOM: 1 * 1 items
Supplier: LABCONCO


Description: Support stand for oxygen and moisture removal column
Catalog Number: LBCP5244300
UOM: 1 * 1 items
Supplier: LABCONCO


Description: Flowmeter, for inline drying train connection to provide visual confirmation of drying train circulation
Catalog Number: LBCP5244100
UOM: 1 * 1 items
Supplier: LABCONCO


Description: Gas and vacuum tubing connection kit, automatic pressure controller, with flexible vinyl tubing and fittings necessary to connect user-supplied inert gas supply tank and rotary vane vacuum pump to valves located on the glove box
Catalog Number: LBCP5245200
UOM: 1 * 1 items
Supplier: LABCONCO


Description: Tissue holder, epoxy-coated steel, accommodates a box of tissues in the upside down or upright position; opening in the holder permits wipes to be dispensed from the bottom
Catalog Number: LBCP3927800
UOM: 1 * 1 items
Supplier: LABCONCO


Description: Electrical 9-Pin Pass-Through installation kit, incl. drill bits and holesaws for installing 5075619 Electrical 9 Pin Sealed Pass-Through
Catalog Number: LBCP5241100
UOM: 1 * 1 items
Supplier: LABCONCO


Description: Pressure relief valve vent kit for exhaustig the pressure relief valve during overpressurization, incl. 3,9" OD × 3,8" ID thimble connection, gasket, two elbows, four clamps and 13" long tubing (Ductwork for outside venting and 5230600 Pressure Relief Valve are required but not included)
Catalog Number: LBCP5242700
UOM: 1 * 1 items
Supplier: LABCONCO


Description: Oxygen and moisture removal tubing kit, incl. 25' fluorinated ethylene propylene (FEP) tubing, eight tube inserts and two connectors to connect the Oxygen and Moisture Removal Column to diaphragm pump
Catalog Number: LBCP5242501
UOM: 1 * 1 items
Supplier: LABCONCO


Description: Digital hygrometer, handheld, measures both percent relative humidity from 0-100% and temperature in ° F/° C; incl. 9 volt alkaline battery
Catalog Number: LBCP5244800
UOM: 1 * 1 items
Supplier: LABCONCO


Description: Viewing window, acrylic (749×396×12,7 mm) with dry powder epoxy-coated steel frame, replaces standard laminated glass window
Catalog Number: LBCP5236100
UOM: 1 * 1 items
Supplier: LABCONCO


Description: Hanging organizer bin (137,16 mm), plastic, container holds miscellaneous small items
Catalog Number: LBCP5247300
UOM: 1 * 1 items
Supplier: LABCONCO


Description: Hanging organizer bin (187,96 mm), plastic, container holds miscellaneous small items
Catalog Number: LBCP5247301
UOM: 1 * 1 items
Supplier: LABCONCO


Description: Moisture monitor/hygrometer for placement inside the main chamber to continuously monitor moisture levels and absolute moisture content in gas (0 - 10000 ppm); consists of chemically inert ceramic technology moisture sensor, sampling block, digital display monitor, sampling pump, switching power supply and on/off switch, for 230 V units
Catalog Number: LBCP5244901
UOM: 1 * 1 items
Supplier: LABCONCO


Description: Canister with stand for holding any trap insert, clear polypropylene canister allows visual inspection of trap contents
Catalog Number: LBCP7815301
UOM: 1 * 1 items
Supplier: LABCONCO


Description: Oxygen and moisture removal column, for reduceing the oxygen level to less than 5 ppm and moisture level to less than 50 ppm; requires connection to two manual valves on the main chamber and a diaphragm vacuum pump for atmosphere oxygen/moisture removal and recirculation
Catalog Number: LBCP5244200
UOM: 1 * 1 items
Supplier: LABCONCO


Description: Flat work surface, black epoxy resin, may be placed atop two Protector Standard Base Cabinets to support Precise™ glove boxes, 1524×762×31,75 mm
Catalog Number: LBCP4882807
UOM: 1 * 1 items
Supplier: LABCONCO


353 - 368 of 783