You Searched For: JULABO GmbH

Supplier: JULABO GMBH

Description: Calibration baths have been designed for applications in calibration laboratories such as ISO, DKD, NAMAS, UKAS and conform to the requirements according to DIN EN ISO 9001:2000. Units have a chamber at a constant temperature level and can be used for precise calibration of temperature sensors, measuring instruments, thermometers according to national and international standards. Refrigerated models are suitable for use at temperatures from −30 to +200 °C as well as use as calibration baths for temperatures from 50 to 300 °C. With the optional precision reference sensor it is possible to measure the reference temperature. Baths feature a PID cascade temperature control for highest internal and external temperature stability and an integrated programmer with 10 program steps.

Supplier: JULABO GMBH

Description: Rack, Test tube, Test tube racks, up to 100 °C, for TW8, TW12, TW20, SW22, SW23, For tube Ø: 12/13 mm, No. of Holes: 90

Supplier: JULABO GMBH

Description: 2× adapters, G 1 ¼" female to NPT ¾" male

Catalog Number: (461-3170)

Supplier: JULABO GMBH

Description: FD flow through coolers are used for cooling a loop circuit of a closed system, the unit must be connected in the return line of a heating circulator. The compact, easy to use units are suitable for a variety of cooling applications.

UOM: 1 * 1 items

Sale

Supplier: JULABO GMBH

Description: ISO 5 point calibration certificate, For: Calibration baths

Supplier: JULABO GMBH

Description: Tubing for circulator, Chloroprene, Tubing int.Ø: 12 mm

Catalog Number: (461-3619)

Supplier: JULABO GMBH

Description: Hollow PP balls, 20 mm Ø, For: Open heating baths, heating circulators, water baths and shaking water baths

UOM: 1 * 1.000 items

Sale

Supplier: JULABO GMBH

Description: Bath fluids have been carefully selected and proven in long-term service. They are suitable for use with heating and refrigerated circulators whenever water cannot be employed as bath fluid. The choice of bath fluid is critical for best results in temperature control and operation of the circulator.

Supplier: JULABO GMBH

Description: 2 barbed fittings for tubing 12 mm ID, For: CF30, CF31, CF40, CF41

Supplier: JULABO GMBH

Description: These powerful and robust CORIO™ laboratory circulators provide the exact temperature, absolute precision and a wide working temperature range. The CORIO™ CD controller is an advanced unit with professional technology for demanding applications and can be used for temperature control of internal or external applications. The jet nozzle allows continuous adjustment of the pump stream in the system. The insulated stainless steel baths are durable and have an integrated drain tap. These heating/cooling circulators are ideal for temperature control of samples in a circulator bath or temperature control of an external application. For example: Measuring cells, refractometers, polarimeters, photometers, viscometers, fermenters, electrophoresis chambers, chromatography columns, rotary evaporators and rheometers.

Supplier: JULABO GMBH

Description: Tubing made of stainless steel 1.4404 for use with all Presto process systems.

Catalog Number: (461-0324)

Supplier: JULABO GMBH

Description: The compact AWC100 air to water recirculating cooler is designed to remove small heat loads from external systems where cooling water can be above ambient and where temperature control is secondary. Coolers which do not have a refrigeration unit are ideal for use in circuits with Peltier elements, analytical devices, polarimeters, refractometers and CCD cameras. The ventilator speed (i.e. the cooling capacity) can be adjusted in two stages, cooling capacity depends on the temperature difference between return line temperature and ambient temperature. The cooling principle: Warm bath fluid is pumped through the heat exchanger. The heat exchanger is cooled by a ventilator motor and thus removes the produced heat.

UOM: 1 * 1 items

Sale

Supplier: JULABO GMBH

Description: Transfer tubing, Length: -

Catalog Number: (462-4109)

Supplier: JULABO GMBH

Description: Lift up stainless steel lid, For: TW20, SW22, SW23

UOM: 1 * 1 items

Sale

Supplier: JULABO GMBH

Description: Ultra-low temperature refrigerated circulators for heating and cooling. The units are suitable for external temperature applications with simultaneous operation in the bath tank. The units provide particularly high heating and cooling capacities for rapid heating and cooling times even for large volume, external systems. FP models offer proportional cooling control to ensure energy saving performance and to reduce heat generation to the environment. Models with the designation W are water cooled. All models have handles and castors which allow easy transportation and drain ports for conveniently draining the bath fluid. The units offer an improved insulation to prevent ice formation and have a filling level display. Typical applications: Temperature control of jacketed reaction vessels, autoclaves, mini plant installations, kilo labs, freezing point determination, calibration at low temperatures and petroleum testing.

Supplier: JULABO GMBH

Description: Compact, ergonomically designed chillers which have integrated stainless steel tanks with large volumes. Models can be either air or water cooled. Applications include use with rotary evaporators, autoclaves, reaction vessels and for routine laboratory cooling. All units have an LED temperature display for actual/set point integrated into a splash-proof keypad and recessed grips for easy relocation integrated in the housing. A hinged tray serves as a compartment for the operating manual and other documents. The removable venting grid allows for easy cleaning of the condenser. Venting slots are located on the front and back, allowing units to be placed directly next to each other. Models FL2503 to FLW11006 have an early warning function with sensor monitoring to signal if the condenser is dirty, and online diagnostics with 'BlackBox' function.