You Searched For: JULABO GmbH


258  results were found

SearchResultCount:"258"

Sort Results

List View Easy View

Rate These Search Results

Supplier: JULABO GMBH
Description: 2× adapters, G 1 ¼" female to barbed fitting for tubing ¾" inner diameter

Catalog Number: (461-3619)
Supplier: JULABO GMBH
Description: Hollow PP balls, 20 mm Ø, For: Open heating baths, heating circulators, water baths and shaking water baths
UOM: 1 * 1.000 items


Supplier: JULABO GMBH
Description: ISO 5 point calibration certificate, For: Calibration baths

Supplier: JULABO GMBH
Description: Calibration baths have been designed for applications in calibration laboratories such as ISO, DKD, NAMAS, UKAS and conform to the requirements according to DIN EN ISO 9001:2000. Units have a chamber at a constant temperature level and can be used for precise calibration of temperature sensors, measuring instruments, thermometers according to national and international standards. Refrigerated models are suitable for use at temperatures from −30 to +200 °C as well as use as calibration baths for temperatures from 50 to 300 °C. With the optional precision reference sensor it is possible to measure the reference temperature. Baths feature a PID cascade temperature control for highest internal and external temperature stability and an integrated programmer with 10 program steps.

Supplier: JULABO GMBH
Description: Rack, Test tube, Test tube racks, up to 100 °C, for TW8, TW12, TW20, SW22, SW23, For tube Ø: 11/12 mm, No. of holes: 90

Catalog Number: (461-3170)
Supplier: JULABO GMBH
Description: FD flow through coolers are used for cooling a loop circuit of a closed system, the unit must be connected in the return line of a heating circulator. The compact, easy to use units are suitable for a variety of cooling applications.
UOM: 1 * 1 items


Supplier: JULABO GMBH
Description: Tubing for circulator, Viton®, Tubing int.Ø: 8 mm

Supplier: JULABO GMBH
Description: 2 Adapters M16x1 male to NPT ¼" female, For: HE, HL, SL, CF

Supplier: JULABO GMBH
Description: Bath fluids have been carefully selected and proven in long-term service. They are suitable for use with heating and refrigerated circulators whenever water cannot be employed as bath fluid. The choice of bath fluid is critical for best results in temperature control and operation of the circulator.

Supplier: JULABO GMBH
Description: Lift up Makrolon® lid, For: TW20, SW22, SW23

Supplier: JULABO GMBH
Description: These powerful and robust CORIO™ laboratory circulators provide the exact temperature, absolute precision and a wide working temperature range. The CORIO™ CD controller is an advanced unit with professional technology for demanding applications and can be used for temperature control of internal or external applications. The jet nozzle allows continuous adjustment of the pump stream in the system. The insulated stainless steel baths are durable and have an integrated drain tap. These heating/cooling circulators are ideal for temperature control of samples in a circulator bath or temperature control of an external application. For example: Measuring cells, refractometers, polarimeters, photometers, viscometers, fermenters, electrophoresis chambers, chromatography columns, rotary evaporators and rheometers.

Environmentally Preferable

Catalog Number: (461-0324)
Supplier: JULABO GMBH
Description: The compact AWC100 air to water recirculating cooler is designed to remove small heat loads from external systems where cooling water can be above ambient and where temperature control is secondary. Coolers which do not have a refrigeration unit are ideal for use in circuits with Peltier elements, analytical devices, polarimeters, refractometers and CCD cameras. The ventilator speed (i.e. the cooling capacity) can be adjusted in two stages, cooling capacity depends on the temperature difference between return line temperature and ambient temperature. The cooling principle: Warm bath fluid is pumped through the heat exchanger. The heat exchanger is cooled by a ventilator motor and thus removes the produced heat.
UOM: 1 * 1 items


Supplier: JULABO GMBH
Description: Insulation for CR® and Viton® tubing (I.Ø 12 mm)

Supplier: JULABO GMBH
Description: Tubing made of stainless steel 1.4404 for use with all Presto process systems.

Supplier: JULABO GMBH
Description: Profibus DP interface, for instruments with RS232, For: All New Presto® series units

Supplier: JULABO GMBH
Description: Environmentally friendly recirculating coolers that saves tap water, these units were designed for simple cooling tasks where reliable continuous operation is important. Due to their compact design, the coolers can be positioned either on or under laboratory bench tops. Units can be used with water, water/glycol or Julabo Thermal G. They are ideal for cooling rotary evaporators, Kjeldahl instruments, measurement cells, automated analysis systems, CCD cameras, polarimeters, refractometers, calorimeters and Soxhlet apparatus.

Environmentally Preferable

Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at 1-800-932-5000.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at 1-800-932-5000.
This product is marked as restricted and can only be purchased by approved Shipping Accounts. If you need further assistance, email VWR Regulatory Department at eurega_services@eu.vwr.com
-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organization. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
This product is no longer available. Alternatives may be available by searching with the VWR Catalog Number listed above. If you need further assistance, please call VWR Customer Service at 1-800-932-5000.
1 - 16 of 258
no targeter for Bottom