You Searched For: Vacuum+Controllers

Catalog Number: (VACU20638497)

Supplier: VACUUBRAND

Description: Round bottom flask, coated, 500 ml

UOM: 1 * 1 items

Sale

Supplier: VACUUBRAND

Description: The VacuuCenter BVC basic is designed for connection to an existing external vacuum source like a diaphragm pump or a vacuum network (e.g., VACUU·LAN®) and does not require electric power. The chemically resistant mechanical vacuum controller always ensures an optimal operating vacuum. The controller opens only when needed thus limiting the gas load on the vacuum source. The evaporation of collected liquid is minimised. The inlet tubing integrated in the bottle head reduces aerosol and foam formation and ensures a long service life of the hydrophobic protection filter. The aspiration system is available either as BVC basic with 4 litre PP bottle or as BVC basic G with 2 litre coated borosilicate glass bottle.

Supplier: VACUUBRAND

Description: <B>Chemistry diaphragm pumps: </B>Chemistry diaphragm pumps in equipment category 2 (e.g. for Zone 1) with ATEX compliance. These pumps are exceptionally well designed for the avoidance of ignition sources. They have good chemical resistance, are oil-free, have no friction surfaces and the suction chamber is hermetically sealed off from the drive unit compartment. Motor with flameproof enclosure and integrated, self contained overcurrent and overheating protection for direct 230 V/60 Hz single-phase connection. Diaphragm pump heads made of anti-static materials. Chemically resistant: Materials in contact with media; fluorinated plastics, stainless steel, FFKM. Gas ballast with separate inert gas connection. Pressure relief valves inside and at the outlet. Safety membrane technology with the option for inert gas flushing and membrane tear detection.

Catalog Number: (VACU20744300)

Supplier: VACUUBRAND

Description: This four-stage chemistry-design diaphragm pump is an excellent solution for continuous, oil-free pumping of corrosive gases and vapors and meet highest requirements. The four-stage design of the eight-cylinder pump MV 10C NT provides the advantageous combination of high pumping speed and very low ultimate vacuum of 0,9 mbar in a very compact design. All internal parts in contact with pumped media are made of chemically resistant fluoroplastics. Well-proven PTFE sandwich diaphragms increase reliability and extend operating life.

UOM: 1 * 1 items

Sale

Supplier: GARDNER DENVER

Description: All standard WOB-L piston pumps are recommended for pumping vapors of aqueous solutions including buffers but not for acidic, basic or organic vapours or gases.

Catalog Number: (462-0205)

Supplier: VWR Collection

Description: The MX immersion thermostat is user friendly with three control buttons and on-screen prompts. The convenient slide control enables the flow rate to be easily adjusted, and it can clamp securely to straight or curved tank walls.

UOM: 1 * 1 items

Sale

Supplier: KGW

Description: Cold traps are used in conjunction with vacuum pumps to collect condensation produced from humidity or solvents. Model KF cold traps have a GL 32 glass thread together with a screw-on cap (spout), through which the condensate can easily be poured out of the cold trap. Made from borosilicate glass 3.3, in compliance with DIN/ISO 3585.

Supplier: BURKLE

Description: Adapter set for VacuMan

Catalog Number: (KGWA1707)

Supplier: KGW

Description: Cold traps are used in conjunction with vacuum pumps to collect condensation produced from humidity or solvents and these cold traps can be used for many different tasks. The most common application is gas cleaning, drying and condensation process. Model CP 1 has got an additional vacuum flange NW 16 with a vacuum gauge.

UOM: 1 * 1 items

Sale

Catalog Number: (KGWA17380-NW16)

Supplier: KGW

Description: Simple cold traps, which are also known as cold finger condensers, are used in conjunction with vacuum pumps and the condensation Produced from humidity or solvents these cold traps can be used for many different tasks. With glass vacuum flanges you are able to connect this cold trap directly to the metal flanges of a high vacuum pump.
Made from borosilicate glass 3.3, in compliance with DIN/ISO 3585.

UOM: 1 * 1 items

Sale

Supplier: KGW

Description: These cold traps (cold finger condensers) are constructed in the same way as standard cold traps.

Supplier: KGW

Description: Cold trap, KFL SL 29-GL, spare part, without spout, with threaded glass joint GL 18 and PTFE olive, borosilicate glass 3.3, condensate cap. 250 ml

Catalog Number: (KGWA1702)

Supplier: KGW

Description: This cold trap is a complete version in which the dewar flask is bonded to the cold trap, because of its design, this version has got two free walls for condensation. It is therefore particularly suited for trapping a high level of condensate from humidity, or solvents. This cold trap is equipped with a valve for draining off the condensate. It has got viewing strips as standard so that the LN₂ coolant level can easily be monitored. The standard cold trap is provided with conical ground joint connections NS 29/32.

UOM: 1 * 1 items

Sale

Supplier: VWR Collection

Description: These pipetting devices accept both disposable and standard pipettes in the flexible tapered chuck, per ASTM Standard E714-80. They provide safe, accurate and trouble-free pipetting with simple, one-handed operation.

Supplier: VACUUBRAND

Description: The VacuuCenter BVC professional serves for aspiration and disposal of biological fluids, providing outstanding levels of comfort and safety for working with biological and biohazardous materials. A non contact sensor monitors the liquid level in the collection bottle electronically and prevents overfilling. A disinfection routine allows the suction of disinfectants through an aspiration hand set and tubing after switching off the pump, and so supports demanding safety protocols. The BVC professional with 4 litre PP bottle that has self-closing quick couplings minimises risk in transporting hazardous waste and of contamination in the workplace. The version with coated 2 litre borosilicate glass bottle allows the user to work with aggressive disinfectants like chlorine bleach.

Catalog Number: (181-0120)

Supplier: USBECK LABORGERATE

Description: Water jet pump in nickel-plated brass.

UOM: 1 * 1 items

Sale