You Searched For: Surface+Protectors

Catalog Number: (TSSPBA40-21-61295)

Supplier: TECHNICAL SERVICE SPARE PARTS

Description: OVER HEAT PROTECTOR 1 * 1 Each

UOM: 1 * 1 Each

Sale

Catalog Number: (MIND009-005645-00W)

Supplier: SHENZHEN MINDRAY BIO MEDICAL

Description: wire of cooling surface fan(BM20) 1 * 1 items

UOM: 1 * 1 items

Sale

Catalog Number: (LBCP6963802)

Supplier: LABCONCO

Description: Epoxy work surface 1 * 1 items

UOM: 1 * 1 items

Sale

Supplier: HACH

Description: In 24 hours, Hach's m-ColiBlue24® broth give the simultaneous results for total coliforms and <i>E. coli</i>. Hach's ready-to-use media eliminates measuring, mixing, and autoclaving steps necessary to prepare dehydrated media. Glass ampules, plastic ampules, 100 ml bottles of m-ColiBlue24® and agar plates, afford maximum shelf life and ease of use for pre-measured and prepared media. Enumerate total coliforms and <i>E. coli</i> on one petri dish. Differentiate colonies easily - red and blue indicate total coliforms and blue specifies <i>E. coli</i>. Get optimal recovery of stressed and injured organisms. Use m-ColiBlue24® broth to accurately monitor and evaluate total coliform and E. coli in drinking water; wastewater; bottled water; beverages; surface, ground, and well water; and ultrapure, chemical processing and pharmaceutical processing waters. With ready-to-use m-ColiBlue24® Broth, you can:

Catalog Number: (MIND01BA400017000W)

Supplier: SHENZHEN MINDRAY BIO MEDICAL

Description: REACTION DISK OVERHEAT PROTECTOR 1 * 1 items

UOM: 1 * 1 items

Sale

Catalog Number: (UVPA19-0112-01)

Supplier: UVP ULTRA VIOLET PRODUCTS

Description: UV Protector for TM20Transilluminator 19-0112-01 1 * 1 items

UOM: 1 * 1 items

Sale

Supplier: IKA JANKE KUNKEL

Description: The HBC circulating baths have a high-quality stainless steel bath, an extended temperature range for tempering fluids in open and covered water baths up to 200/250 °C. The LED/ graphic TFT Display illustrates all relevant process parameters. The large surface of the radiator allows for an optimum heat exchange and a smooth warming of the medium. Units feature push and turn buttons for intuitive menu navigation. All models conform to the highest safety classification III (FL) for use with flammable liquids according to DIN 12876. HBC immersion circulators ensure short heating up times and have a temperature stability of ±0,01 /0,02 K ( basic/control model). The units have an integrated cooling coil, adjustable safety circuit and a front drain valve for safe emptying. To drain the system, a separate valve helps to avoid direct contact with fluid.

Supplier: VACUUBRAND

Description: <B>Chemistry diaphragm pumps: </B>Chemistry diaphragm pumps in equipment category 2 (e.g. for Zone 1) with ATEX compliance. These pumps are exceptionally well designed for the avoidance of ignition sources. They have good chemical resistance, are oil-free, have no friction surfaces and the suction chamber is hermetically sealed off from the drive unit compartment. Motor with flameproof enclosure and integrated, self contained overcurrent and overheating protection for direct 230 V/60 Hz single-phase connection. Diaphragm pump heads made of anti-static materials. Chemically resistant: Materials in contact with media; fluorinated plastics, stainless steel, FFKM. Gas ballast with separate inert gas connection. Pressure relief valves inside and at the outlet. Safety membrane technology with the option for inert gas flushing and membrane tear detection.

Catalog Number: (IKAA3480300)

Supplier: IKA JANKE KUNKEL

Description: HEATING SURFACE MODEL VMS C4/2 1 * 1 items

UOM: 1 * 1 items

Sale

Supplier: IKA JANKE KUNKEL

Description: RET control-visc safety magnetic stirrers with heating and integrated balance which are suitable for unsupervised operation. Clear, multilingual TFT display makes it easy to set all parameters and the sealed casing ensures a long service life. Integrated temperature control feature enables connection of a temperature probe, placed directly in the medium, to control medium temperature with a high degree of precision. The stainless steel composite hot plate (white units have a chemically resistant enamelled plate), reaches a temperature of 340 °C, enabling rapid heating. RS232 and USB interface enables PC control of the magnetic stirrer and documentation of all test parameters. 'Lock' function prevents inadvertent changes of speed and temperature settings. As a safety feature, a 'hot' sign flashes when the unit is switched off but the heating surface is still hot. Unit has a DIN 12878 socket for connecting an electronic contact thermometer, for high precision temperature control and also features detached magnet detection and has a BNC socket for a pH electrode.

Catalog Number: (94001-0230)

Supplier: Avantor

Description: Polystyrene lid suitable for use with J.T.Baker® 384 and 96 SW.

UOM: 1 * 100 items

Sale

Supplier: VWR Collection

Description: VWR®, Crucible lid, For Ø: 35 mm, Porcelain

Catalog Number: (738-0028)

Supplier: Greiner Bio-One

Description: These high profile lids, height 9 mm, are designed to protect against contamination and evaporation during sample storage and cell culture. Lids without condensation rings are mainly used with non tissue culture treated microplates. Lids with condensation rings are recommended for cell culture applications, since they inhibit cross contamination.

UOM: 1 * 100 items

Sale

Catalog Number: (VWRU71000-150)

Supplier: VWR Collection

Description: VWR®, Crucible lid, For Ø: 80 mm, Porcelain

UOM: 1 * 6 items

Sale

Supplier: DWK LIFE SCIENCES

Description: These sleeves are made from EPDM (ethyene/propylene-diene-rubber).

Catalog Number: (KART572)

Supplier: KARTELL

Description: Acrylic protection shield, transparent, thickness: 9 mm.

UOM: 1 * 1 items

Sale