Print…

You Searched For: Mechanical+Seals


1,637  results were found

Refine Results Sort by
SearchResultCount:"1637"

Sort Results

List View Easy View

Rate These Search Results

Product Image-312-1171

Vacuum samplers, MiniSampler

Supplier: BURKLE
Description: The sample liquid only comes into contact with the suction hose and the original sample bottle. Cross-contamination is greatly reduced. Immediately after taking the sample, the bottles are sealed.
● PE MiniSampler for general sampling
● PTFE MiniSampler for ultra-pure sampling

Product Image-MILYXX2702550

Sampling Manifold, 1225

Catalog Number: (MILYXX2702550)
Supplier: MILLIPORE
Description: Simultaneously vacuum filter 12 samples for rapid analysis of retentate or filtrate. Numbered positions on the filter plate assure accurate sample tracking. Sealing stoppers maintain vacuum on unused sample cups. Accessory extension barrels increase sample volumes from 15 to 50 ml.
UOM: 1 * 1 items

New Product


Product Image-COWI005.0.0824

Shaft guides, High Performance (HP), for standard taper ground glass joints

Supplier: COWIE
Description: High Performance (HP) shaft guides provide an effective guide for use with glass and metal shaft stirrers over a wide range of temperatures without shedding particles from a specially formulated PTFE-PEEK seal whilst maintaining vacuum. The moulded-in PTFE-PEEK guide ring located at the end of the taper provides a guide to assist alignment of the shaft.

Product Image-MILYMSFBN6B50

MultiScreenHTS Filter Plates with Glass Fibre Filter

Supplier: MILLIPORE
Description: MultiScreenHTS plates are specifically developed for high-throughput use with automated work stations. Wells are individually sealed to prevent incubation crosstalk and the underdrain is removable for access to the filters. Filter plates are available in 96 and 384-well platforms with a broad selection of membranes and plastics.

New Product

Product Image-183-1201

Air admittance valve

Catalog Number: (183-1201)
Supplier: VACUUBRAND
Description: These valves are compact air admittance valves with small flange. The VB valve is manually operated. On rotating the knurled screw cap the valve disc is lifted off the seating and air enters through the holes. The valve disc is rotatable. Therefore the valve seat seal is prevented against wear during opening and closing.
UOM: 1 * 1 items
Product Image-MILYMRCF0R100ET

Microcon® DNA Fast Flow Centrifugal Filters

Supplier: MILLIPORE
Description: Optimized for the concentration and recovery of genomic DNA with SDS buffer. The low nonspecific binding characteristics of the membrane and the other device components, coupled with its medical-grade O-ring seal, allow the device to accommodate several wash steps with minimal sample loss.

New Product

Product Image-MILYSLGPB5010

Millex® Polyethersulfone Inline Filters

Supplier: MILLIPORE
Description: The bi-directionally supported Millex-GP50 filter is a sterilising filter for aqueous solutions. It removes microorganisms, particles, precipitates, and undissolved powders larger than 0,22 μm. This single-use product consists of a 0,22 μm membrane filter sealed in an acrylic housing.

New Product

Product Image-444-0733

VWR® INCU-Line®, Shaking Incubators

Supplier: VWR Collection
Description: Shaking incubators with a small footprint. These compact units feature a stackable design and expanded temperature range which makes the ILS 4 and ILS 6 ideal for molecular biology applications and general use. The integral orbital shaker means they are highly versatile. The SmartChek™ temperature control system (exclusive to the Avantor Collection) guarantees precise temperature control. Mechanical convection maintains a stable temperature environment and provides quick recovery after opening the door. A safety thermostat is located on the back of the unit. The insulated door has a large, double-glazed observation panel and opens to almost to 180° for easy access.

Product Image-MILYSSEP0470W

Membrane filters, hydrophobic edge

Supplier: MILLIPORE
Description: Hydrophobic edge membranes are standard MF-type filters with edges rendered hydrophobic to 3 or 6 mm widths. In antibiotic and bacteriostatic drug sterility testing by membrane filter method, the 6 mm wide non-wetting edge prevents drug intrusion under holder sealing rim.

New Product

Product Image-VWRU89000-306

VWR®, Petri Dishes

Supplier: VWR Collection
Description: Borosilicate glass 3.3. These dishes have reinforced beaded edges to resist mechanical breakage and to help in centering the bottom inside the cover. Covers have a fused-on bright white ceramic enamel marking spot and inscription, including 'cover'; bottoms have a blue ceramic enamel inscription, including 'bottom'. The combination of different colours and wording makes it quick and easy identification of the parts when sorting, selecting and assembling pairs.

Product Image-115-0312

Cleanroom wipes, sterile, SterileWipe™ LP 10

Catalog Number: (115-0312)
Supplier: ITW-CONTAMINATION TEXWIPE
Description: SterileWipe™ LP 10 is a 100% continuous-filament polyester wipe with thermally sealed borders that have been designed to control particle and fiber contamination. The wipe is suitable for cleaning sterile environments such as pharmaceutical aseptic fill areas, biotechnology manufacturing facilities, microbiological laboratories, sterile suites and prep rooms.
UOM: 1 * 500 items

Certificates


Product Image-MILYXX6602501

Flask and Neoprene Stopper

Catalog Number: (MILYXX6602501)
Supplier: MILLIPORE
Description: Simultaneously vacuum filter 12 samples for rapid analysis of retentate or filtrate. Numbered positions on the filter plate assure accurate sample tracking. Sealing stoppers maintain vacuum on unused sample cups. Accessory extension barrels increase sample volumes from 15 to 50 ml.
UOM: 1 * 1 items

New Product


Product Image-700-0814

VWR® Midi S PerfectBlue, Gel system

Catalog Number: (700-0814)
Supplier: VWR Collection
Description: Capable of rapidly running up to 160 samples, the Midi S is a compact, but highly efficient, electrophoresis system. Versatility is built-in, with six different comb positions and a choice of 10 different comb types and thicknesses available. For rapid handling, special microtitre combs enable rapid loading with a multichannel pipette, while the effective rubber sealed 'end gates' allow gel pouring right in the tray. With its sturdy design and straight electrodes, the results are clear, crisp and quick, free from 'smiling' bands.
UOM: 1 * 1 items
Product Image-MILYMAWP037AM

Aerosol Analysis Monitors, 37 mm

Supplier: MILLIPORE
Description: Millipore's 37 mm Aerosol analysis monitors are transparent, disposable, plastic filter holders pre-assembled with Type MF (mixed cellulose esters) Millipore filters. A thin cellulose support seals the filter between monitor sections to distribute sample flow evenly over the filter surface. The three-part design holds the filter in-place when the top section is removed for open aerosol sampling.

New Product

Product Image-MILYMSBVN1210

MultiScreenHTS Filter Plates with Hydrophilic Durapore® PVDF membrane

Supplier: MILLIPORE
Description: MultiScreenHTS plates are specifically developed for high-throughput use with automated work stations. Rigid sidewalls improve handling and ample surfaces are provided for bar code labels. Wells are individually sealed to prevent incubation crosstalk and the underdrain is removable for access to the filters. Filter plates are available in 96- and 384-well platforms with a broad selection of membranes and plastics.

New Product

Product Image-ILMV412422-10

Dry vacuum and chemical resistant diaphragm pumps (MPC)

Supplier: GARDNER DENVER
Description: The MPC chemical duty diaphragm pumps use PTFE and other fluorinated plastics for the wetted parts to allow aggressive solvent and acid vapours to be pumped. If the pump should handle harsh chemical vapours, then the superior chemical resistant X2 version with higher grade seals and thicker coatings are the best choice. These are well known for quiet operation and running smoothness.

Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at 1-800-932-5000.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at 1-800-932-5000.
This product is marked as restricted and can only be purchased by approved Shipping Accounts. If you need further assistance, email VWR Regulatory Department at eurega_services@eu.vwr.com
-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organization. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
This product is no longer available. Alternatives may be available by searching with the VWR Catalog Number listed above. If you need further assistance, please call VWR Customer Service at 1-800-932-5000.
625 - 640 of 1,637
no targeter for Bottom